Non Hydraulic Forklift Attachments
Safety Cages for Forklifts
Jib Attachments for Forklifts
Extension Slippers for Forklift Tines
Container Access Ramps for Forklifts
Fork Spreaders for Large Loads
Drum Handling - Non Hydraulic
Dirt Buckets - Non Hydraulic
Wheelie Bin Emptier for Forklifts
Roller Forks
Roll Prongs for Carpet & Rolls
Fork Arms & Carriage Bars
Tarp Spreader for Truck Tarps

 

Drum Handling - Non Hydraulic:

Type: BGN-1 / BGN-2 Drum Lifters


Type: BGN-1 / BGN-2  Drum Lifters

Drum handling made easy. A good field of vision allows the operator to continually observe the drum being handled. The operator does not leave the drivers seat. The unique Grab Beak design provides a high clamping force, even when travelling over uneven ground. With few moving parts this attachment requires no down time for repairs. These Lifters are suitable for standard 205 litre steel or plastic drums.

The type BGN-1 has been designed to lift a single drum while the type BGN-2 has been designed to lift 2 drums side by side or a single drum by either Grab Beak mechanism. A contoured rest acts at a point low enough down the drum to prevent damage to the drum and its labelling.

The standard finsh on both models is Zinc Plated.

 
Type: BGN-1 / BGN-2  Drum Lifters
Type: BGN-1 / BGN-2  Drum Lifters

Drawing and Specifications:     BGN_1_Sales  BGN_2_Sales

View Video

Type: SDLC1 Drum Lifter


Type: SDLC1 Drum Lifter

Designed for standard 205 litre steel drums, the fully automatic clamping action enables safe and precise
placement of drums without the operator having to leave the Drivers seat. The Support Arms are adjustable to ensure
secure clamping. The drum is gripped by pushing the arms against the drum centre and driving forward with the Forklift.
The arms will engage around the drum and lock under the rolling hoop when raised. The heavier the load, the tighter the
grip becomes. To release the drum, simply lower the drum onto ground level and reverse the Forklift.
Zinc finish.

SPECIFICATIONS:
* Safe Working Load (SWL) 500kg
* Unit Weight 100kg
* Load Centre 1375mm
* HCG 760mm
* VCG -40mm
* Pocket Size 185 x 60mm
* Pocket Centres 420mm

 
Type: SDLC1 Drum Lifter
Type: SDLC1 Drum Lifter

Drawing and Specifications:     SDCL1_Sales  

View Video

Type: DL1000 Drum Lifter


Type: DL1000 Drum Lifter

The safest drum lifter available. This attachment ensures 205L steel drums are moved with 100% security. The drum is quickly clamped via eccentric lock. A further safety catch prevents accidental release.

SPECIFICATIONS:

* 1000kg Safe Working Load
* Unit Weight 60kg
* Load Centre 1160mm
* Pocket Size 165 x 65mm
* Pocket Centres 335mm

 
Type: DL1000 Drum Lifter
Type: DL1000 Drum Lifter

Drawing and Specifications:     DL1000PBO_Sales  DL1000_Sales

Type: DR-NH Drum Rotator


Type: DR-NH Drum Rotator

Handle rotation using minimum effort for fully controlled tipping, allowing complete emptying of the drum contents.

SPECIFICATIONS:

* 500kg Safe Working Load
* 360 degree Rotation
* Unit Weight 100kg
* Load Centre 900mm
* Pocket Size 160 x 65mm
* Pocket Centres 800mm

 
Type: DR-NH Drum Rotator
Type: DR-NH Drum Rotator

Drawing and Specifications:     DRNH_Sales

View Video

Type: DR-NC Drum Rotator


Type: DR-NC Drum Rotator

Features hand chain operation to allow the drum to be rotated when lifted above the chest height of the operator.

SPECIFICATIONS:

* 500kg Safe Working Load
* 360 degree Rotation
* Unit Weight 90kg
* Load Centre 900mm
* Pocket Size 160 x 65mm
* Pocket Centres 800mm

 
Type: DR-NC Drum Rotator
Type: DR-NC Drum Rotator

Drawing and Specifications:     DRNC_Sales

Type: DRW-NC & DRW-NH Drum Rotators


Type: DRW-NC & DRW-NH Drum Rotators

The extended load centre of this rotator is ideal for long reach applications. With the fork arm pockets at 480mm centres this attachment will fit narrow carriage forklifts.

Available in either Chain Rotation: Type DRW-NC or Handle Rotation: Type DRW-NH

SPECIFICATIONS:

* SWL: 500kg
* Rotation: 360 degrees
* Unit Weight: 130kg
* Load Centre: 1640mm
* Pocket Size: 160 x 65mm
* Pocket Centres: 480mm

 
Type: DRW-NC & DRW-NH Drum Rotators
Type: DRW-NC & DRW-NH Drum Rotators

Drawing and Specifications:     DRWNC_Sales  DRWNH_Sales

Type: PBO Option Cradle


Type: PBO Option Cradle

By replacing the standard Belly Strap, the PBO option will allow for plastic drums and barrels, as well as standard steel drums to be handled. The dual woven and chain combination Belly Straps hold the drum or barrel firmly in position.

Attachments which can be fitted with the PBO option include:

* DR-NH * DR-NC * CDR-500
* DRW-NH * DRW-NC * DL1000
* SW-NH * SW-NC * DC-R2

NOTE: When the PBO Option is fitted, the Safe Working Load is reduced to 350kg.

 
Type: PBO Option Cradle
Type: PBO Option Cradle

Drawing and Specifications:     DRNC_PBO_Sales  DRNH_PBO_Sales

Type: SW-NC & SW-NH Drum Rotators


Type: SW-NC & SW-NH Drum Rotators

This unique rotator allows for sideways drum rotation without need for hydraulics.

Available in either Chain Rotation: Type SW-NC or Handle Rotation: Type SW-NH

SPECIFICATIONS:

* 500kg Safe Working Load
* 360 degree Rotation
* Unit Weight 110kg
* Load Centre 1400mm
* Pocket Size 160 x 65mm
* Pocket Centres 380mm
* Enamel Paint Finish

 
Type: SW-NC & SW-NH Drum Rotators
Type: SW-NC & SW-NH Drum Rotators

Drawing and Specifications:     SWNC_Sales  SWNH_Sales

View Video

Type: DC-T Drum Dumper


Type: DC-T Drum Dumper

The fast and economical solution to emptying 205L drums. To release the drum the operator pulls the draw chord from the drivers seat. This unit is ideal for scrap and waste products.

SPECIFICATIONS:

* 500kg Safe Working Load
* 180 degree Rotation
* Unit Weight 100kg
* Load Centre 1000mm
* Pocket Size 160 x 65mm
* Pocket Centres 800mm
* Enamel Paint Finish

 
Type: DC-T Drum Dumper
Type: DC-T Drum Dumper

Drawing and Specifications:     DCT_Sales


 

back to top >>