Non Hydraulic Forklift Attachments
Safety Cages for Forklifts
Jib Attachments for Forklifts
Extension Slippers for Forklift Tines
Container Access Ramps for Forklifts
Fork Spreaders for Large Loads
Drum Handling - Non Hydraulic
Dirt Buckets - Non Hydraulic
Wheelie Bin Emptier for Forklifts
Roller Forks
Roll Prongs for Carpet & Rolls
Fork Arms & Carriage Bars
Tarp Spreader for Truck Tarps

 

Safety Cages for Forklifts :

Type: WP-N Work Platform


Type: WP-N Work Platform

The type WP-N Work platform has been designed to safely carry out tasks of short duration and occasional usage with
a forklift truck such as for maintenance. Manufactured strictly in accordance with AS 2359.1 the type WP-N Work
Platform is suitable for a maximum of two people. Supplied standard as a "Flatpack" for on site assembly, or may be
supplied fully assembled upon request.

SPECIFICATIONS:

* Safe Working Load: 250kg
* Unit Weight: 110kg
* Pocket Size: 160 x 60mm
* Pocket Centres: 640mm
* Supplied with Locking Pins
* Zinc Plated Finish

NOTE: The use of this Work Platform on a Forklift truck should not be considered if the lift capacity of that Forklift
is less than 1800kg for a counterbalanced type or 1080kg for a reach type Forklift.

 
Type: WP-N Work Platform
Type: WP-N Work Platform

Drawing and Specifications:     WP_N_Sales Forklift Safety Cage

Type: WP-MS Work Platform


Type: WP-MS Work Platform

The type WP-MS Work Platform has been designed to safely carry out tasks of short duration and occasional usage,
such as maintenance. Manufactured in strict accordance with AS2359 suitable for a maximum of two people, the WP-
MS cage has full mesh panels, eliminating any possibility of objects falling from the cage. Supplied standard as
"flatpack" for on site assembly, or may be supplied fully assembled upon request.

SPECIFICATIONS:

* Safe Working Load: 250kg
* Unit Weight: 122kg
* Fork Pocket Size: 160 x 60mm
* Pocket Centres: 640mm
* Supplied with locking pins
* Zinc Plate Finish

NOTE: The use of this Work Platform on a Forklift truck should not be considered if the lift capacity ot that Forklift is less
than 1860kg for a counterbalanced type or 1116kg for a reach type Forklift.

 
Type: WP-MS Work Platform
Type: WP-MS Work Platform

Drawing and Specifications:     WP_MS_Sales Forklift Safety Cage

Type: WP Work Platform


Type: WP Work Platform

The WP is a fully welded work platform, with a removeable rear protection panel. Work platforms are designed to safely
carry out tasks of short duration and occasional usage, such as maintenance.
Manufactured strictly in accordance with AS2359.1 the WP platform is suitable for a maximum of two people.

SPECIFICATIONS:

* 250kg Safe Working Load
* Unit Weight 115kg
* Galvanised Finish
* Supplied with Locking Pins

## The use of a Work Platform on a forklift truck should not be considered if the lift capacity of that forklift is less than
1825kg for a Counterbalanced type or 1095kg for a reach type forklift.

# Optional harness anchor bracket available.

 
Type: WP Work Platform
Type: WP Work Platform

Drawing and Specifications:     WP_Sales Forklift Safety Cage

Type: WP-OP Order Picking Cage


Type: WP-OP Order Picking Cage

Type WP-OP Order Picking Cage, suitable strictly for "Order Picker" or "Stock Picker" fork trucks.

SPECIFICATIONS (Standard Unit):

* Safe Working Load 1000kg
* Load Centre 600mm
* Unit Weight 180kg
* Handrail Height of 1000mm
* Pocket Size 140 x 65mm
* Pocket Centres 560mm

 
Type: WP-OP Order Picking Cage
Type: WP-OP Order Picking Cage

Drawing and Specifications:     WP_OP_Sales Forklift Stock Picking Cage

Type: WP-OPG Order Picking Cage


Type: WP-OPG Order Picking Cage

Built to the same dimensions as the WP-OP, but also fitted with a full width outward opening gate, enabling access to
stock where required. Suitable strictly for "Order Picker" or "Stock Picker" fork trucks.

SPECIFICATIONS (Standard Unit):

* Safe Working Load 1000kg
* Load Centre 600mm
* Unit Weight 168kg
* Handrail Height of 1000mm
* Pocket Size 140 x 65mm
* Pocket Centres 560mm

 
Type: WP-OPG Order Picking Cage
Type: WP-OPG Order Picking Cage

Drawing and Specifications:     WP_OPG_Sales Forklift Order Picking Cage

Type: WP-GC12 / WP-GC18 Goods Cages


Type: WP-GC12 / WP-GC18 Goods Cages

The WP-GC Forklift Goods Cage is suitable for storage and transport of furniture and whitegoods, and is ideal for the transportation of goods between ground and mezzanine levels. Supplied standard with hinged ramp to enable furniture trolleys to be wheeled into the cage. Standard finish is enamel painted.

The WP-GC Forklift Goods Cage is NOT designed or certified to convey personnel.

SPECIFICATIONS:

* Safe Working Load: 1000kg
* Fork Pocket Size: 160 x 60mm
* Fork Pocket Centres: 644mm

 
Type: WP-GC12 / WP-GC18 Goods Cages
Type: WP-GC12 / WP-GC18 Goods Cages

Drawing and Specifications:     WP_GC12_Sales Goods Cage  WP_GC18_Sales Goods Cage


Safety Cages for Forklifts Product Variations:

 

back to top >>