Non Hydraulic Forklift Attachments
Safety Cages for Forklifts
Jib Attachments for Forklifts
Extension Slippers for Forklift Tines
Container Access Ramps for Forklifts
Fork Spreaders for Large Loads
Drum Handling - Non Hydraulic
Dirt Buckets - Non Hydraulic
Wheelie Bin Emptier for Forklifts
Roller Forks
Roll Prongs for Carpet & Rolls
Fork Arms & Carriage Bars
Tarp Spreader for Truck Tarps

 

Jib Attachments for Forklifts:

Jib Specifications


Jib Specifications

NOTE - When selecting a forklift jib attachment check the pocket centres of the jib you wish to order. Those noted with the
prefix SF, ST and SJW are fitted with wide pockets, and generally suit forklifts fitted with special hydraulic tine positioners.

The lift capacities stated are a structural rating for the jib only, and make no claim as to the suitability of the forklift. Actual
forklift capacity may be less than the structural capacity of the jib. Check with the forklift supplier for actual working
capacities.

In accordance with AS2359.1, when lifting with a jib attachment, the net lifting capacity should be 0.8 times the rating of the
forklift, to allow for a swinging load.

 
Jib Specifications
Jib Specifications

Type: FJCS25 Fixed Jib (Short)


Type: FJCS25 Fixed Jib (Short)

The type FJCS2.5 Fixed Jib (Short) is designed as an affordable general purpose forklift jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. Simply slide onto the fork tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 2500kg Max.
* Load Centre: 790mm
* Unit Weight: 100kg
* Fork Pocket Size: 185 x 65mm
* Fork Pocket Centres: 275mm
* Overall Length when closed: 1.3 metres
* Zinc Finish

 
Type: FJCS25 Fixed Jib (Short)
Type: FJCS25 Fixed Jib (Short)

Drawing and Specifications:     FJS2_5_Sales_Forklift_Jib

Type: SFJS2.5 Fixed Jib (Short)


Type: SFJS2.5 Fixed Jib (Short)

The type SFJS2.5 Fixed Jib (Short) is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. This forklift jib has been fitted with wide pockets suitable for forklifts with special hydraulic tine positioners. Simply slide onto the fork tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 2500kg Max
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 740mm
* Overall Length when closed: 1.3 metres
* Unit Weight: 125kg
* Zinc Finish

 
Type: SFJS2.5 Fixed Jib (Short)
Type: SFJS2.5 Fixed Jib (Short)

Drawing and Specifications:     SFJS2_5_Sales Forklift Jib

Type: FJCL25 Fixed Jib (Long)


Type: FJCL25 Fixed Jib (Long)

The type FJCL25 Fixed Jib (Long) is designed as an affordable general purpose jib with a 3.5 metre reach when fully extended, allowing for long reach lifts. Simply slide onto the fork tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 2500kg Max.
* Load Centre: 950mm
* Unit Weight: 135kg
* Fork Pocket Size: 185 x 65mm
* Fork Pocket Centres: 275mm
* Overall Length Retracted: 2100mm
* Zinc Finish

 
Type: FJCL25 Fixed Jib (Long)
Type: FJCL25 Fixed Jib (Long)

Drawing and Specifications:     FJL2_5_Sales_ Forklift Jib

Type: SFJL2.5 Fixed Jib (Long)


Type: SFJL2.5 Fixed Jib (Long)

The type SFJL2.5 Fixed Jib (Long) is designed as an affordable general purpose forklift jib with a 3.5 metre reach when fully extended allowing for long reach lifts. This forklift Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 2500kg Max
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 740mm
* Overall Length when closed: 2.1 metres
* Unit Weight: 150kg
* Zinc Finish

 
Type: SFJL2.5 Fixed Jib (Long)
Type: SFJL2.5 Fixed Jib (Long)

Drawing and Specifications:     SFJL2_5_Sales_Forklift Jib

Type: FJCS45 Fixed Jib (Short)


Type: FJCS45 Fixed Jib (Short)

The type FJCS45 Fixed Jib (Short) is designed as an affordable general purpose forklift Jib able to manoeuvre in confined spaces, with a 1.925m reach when fully extended. Simply slide onto the Fork Tines and secure with Safety Chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4500kg Max
* Fork Pocket Size: 185 x 65mm
* Fork Pocket Centres: 290mm
* Overall Length when closed: 1.255m
* Unit Weight: 95kg
* Zinc Finish

 
Type: FJCS45 Fixed Jib (Short)
Type: FJCS45 Fixed Jib (Short)

Drawing and Specifications:     FJCS45_Sales_Forklift Jib

Type: FJCL45 Fixed Jib (Long)


Type: FJCL45 Fixed Jib (Long)

The type FJCL45 Fixed Jib (Long) is designed as an affordable general purpose Jib with a 3.465m reach when fully extended. Simply slide onto the Fork Tines and secure with Safety Chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4500kg Max
* Fork Pocket Size: 185 x 65mm
* Fork Pocket Centres: 290mm
* Overall Length when closed: 2.035m
* Unit Weight: 140kg
* Zinc Finish

 
Type: FJCL45 Fixed Jib (Long)
Type: FJCL45 Fixed Jib (Long)

Drawing and Specifications:     FJCL45_Sales

Type: FJCS50 Fixed Jib (Short)


Type: FJCS50 Fixed Jib (Short)

The type FJCS50 Fixed Jib (Short) is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4750kg Max
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 275mm
* Overall Length when closed: 1.3 metres
* Unit Weight: 130kg
* Zinc Finish

 
Type: FJCS50 Fixed Jib (Short)
Type: FJCS50 Fixed Jib (Short)

Drawing and Specifications:     FJS5_Sales

Type: SFJS5 Fixed Jib (Short)


Type: SFJS5 Fixed Jib (Short)

The type SFJS5 Fixed Jib (Short) is designed as an affordable general purpose jib able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4750kg Max
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 1.3 metres
* Unit Weight: 160kg
* Zinc Finish

 
Type: SFJS5 Fixed Jib (Short)
Type: SFJS5 Fixed Jib (Short)

Drawing and Specifications:     SFJS5_Sales

Type: FJCL50 Fixed Jib (Long)


Type: FJCL50 Fixed Jib (Long)

The type FJCL50 Fixed Jib (Long) is designed as an affordable general purpose jib with a 3.5 metre reach when fully extended, allowing for long reach lifts. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4750kg Max
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 275mm
* Overall Length when closed: 2.1 metres
* Unit Weight: 170kg
* Zinc Finish

 
Type: FJCL50 Fixed Jib (Long)
Type: FJCL50 Fixed Jib (Long)

Drawing and Specifications:     FJL5_Sales

Type: SFJL5 Fixed Jib (Long)


Type: SFJL5 Fixed Jib (Long)

The type SFJL5 Fixed Jib (Long) is designed as an affordable general purpose jib with a 3.5 metre reach when fully extended allowing for long reach lifts. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4750kg Max
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 2.1 metres
* Unit Weight: 200kg
* Zinc Finish

 
Type: SFJL5 Fixed Jib (Long)
Type: SFJL5 Fixed Jib (Long)

Drawing and Specifications:     SFJL5_Sales

Type: SFJS7.5 Fixed Jib (Short)


Type: SFJS7.5 Fixed Jib (Short)

The type SFJS7.5 Fixed Jib (Short) is designed as an affordable general purpose jib suitable for larger Forklifts and able to manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 7500kg Max
* Fork Pocket Size: 180 x 80mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 1.39 metres
* Unit Weight: 320kg
* Zinc Finish

 
Type: SFJS7.5 Fixed Jib (Short)
Type: SFJS7.5 Fixed Jib (Short)

Drawing and Specifications:     SFJS7_5_Sales

Type: SFJL7.5 Fixed Jib (Long)


Type: SFJL7.5 Fixed Jib (Long)

The type SFJL7.5 Fixed Jib (Long) is designed as an affordable general purpose jib suitable for larger Forklifts with a 3.56 metre reach when fully extended, allowing for long reach lifts. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 7500kg Max
* Fork Pocket Size: 180 x 80mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 2.19 metres
* Unit Weight: 450kg
* Zinc Finish

 
Type: SFJL7.5 Fixed Jib (Long)
Type: SFJL7.5 Fixed Jib (Long)

Drawing and Specifications:     SFJL7_5_Sales

Type: SFJCS100 Fixed Jib (Short)


Type: SFJCS100 Fixed Jib (Short)

The type SFJS10 Fixed Jib (Short) is designed as an affordable general purpose jib suitable for larger Forklifts and able to
manoeuvre in confined spaces, with a 2.0 metre reach when fully extended. This Jib has been fitted with wide pockets
suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 10,000kg Max
* Fork Pocket Size: 230 x 110mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 1.39 metres
* Unit Weight: 400kg
* Zinc Finish

 
Type: SFJCS100 Fixed Jib (Short)
Type: SFJCS100 Fixed Jib (Short)

Drawing and Specifications:     SFJS10_Sales

Type: SFJCL100 Fixed Jib (Long)


Type: SFJCL100 Fixed Jib (Long)

The type SFJCL100 Fixed Jib (Long) is designed as an affordable general purpose jib suitable for larger Forklifts with a 3.56 metre reach when fully extended, allowing for long reach lifts. This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 10,000kg Max
* Fork Pocket Size: 230 x 110mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 2.19 metres
* Unit Weight: 515kg
* Zinc Finish

 
Type: SFJCL100 Fixed Jib (Long)
Type: SFJCL100 Fixed Jib (Long)

Drawing and Specifications:     SFJL10_Sales

Type: TJCS25 Tilt Jib (Short)


Type: TJCS25 Tilt Jib (Short)

The type TJCS25 Tilt Jib (Short) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 1.4 metres can be gained while the Jib can be fully extended to 2.0 metres. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 2500kg
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 337mm
* Overall Length when closed: 1.35 metres
* Unit Weight: 130kg
* Zinc Finish

 
Type: TJCS25 Tilt Jib (Short)
Type: TJCS25 Tilt Jib (Short)

Drawing and Specifications:     TJS2_5_Sales

Type: STJS2.5 Tilt Jib (Short)


Type: STJS2.5 Tilt Jib (Short)

The type STJS2.5 Tilt Jib (Short) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 1.4 metres can be gained while the Jib can be fully extended to 2.1 metres.
This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 2500kg
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 740mm
* Overall Length when closed: 1.43 metres
* Unit Weight: 160kg
* Zinc Finish

 
Type: STJS2.5 Tilt Jib (Short)
Type: STJS2.5 Tilt Jib (Short)

Drawing and Specifications:     STJS2_5_Sales

Type: TJCL25 Tilt Jib (Long)


Type: TJCL25 Tilt Jib (Long)

The type TJCL25 Tilt Jib (Long) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 2.48 metres can be gained while the Jib can be fully extended to 3.58 metres. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 2500kg
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 337mm
* Overall Length when closed: 2.15 metres
* Unit Weight: 180kg
* Zinc Finish

 
Type: TJCL25 Tilt Jib (Long)
Type: TJCL25 Tilt Jib (Long)

Drawing and Specifications:     TJL2_5_Sales

Type: STJL2.5 Tilt Jib (Long)


Type: STJL2.5 Tilt Jib (Long)

The type STJL2.5 Tilt Jib (Long) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 2.51 metres can be gained while the Jib can be fully extended to 3.66 metres.
This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 2500kg
* Fork Pocket Size: 165 x 65mm
* Fork Pocket Centres: 740mm
* Overall Length when closed: 2.23 metres
* Unit Weight: 205kg
* Zinc Finish

 
Type: STJL2.5 Tilt Jib (Long)
Type: STJL2.5 Tilt Jib (Long)

Drawing and Specifications:     STJL2_5_Sales

Type: TJCL45 Tilt Jib (Long)


Type: TJCL45 Tilt Jib (Long)

The type TJCL45 Tilt Jib (Long) is one of our most versatile Forklift Jib attachments in our range, allowing extra height to 2.23m, with a 3.53m reach when fully extended. Simply slide onto the Fork Tines and secure with Safety Chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4500kg Max.
* Fork Pocket Size: 185 x 68mm
* Fork Pocket Centres: 322mm
* Overall Length when closed 2.1m
* Unit Weight 190kg
* Zinc Finish

 
Type: TJCL45 Tilt Jib (Long)
Type: TJCL45 Tilt Jib (Long)

Drawing and Specifications:     TJCL45_Sales

Type: TJS5 Tilt Jib (Short)


Type: TJS5 Tilt Jib (Short)

The type TJS5 Tilt Jib (Short) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 1.36 metres can be gained while the Jib can be fully extended to 2.0 metres. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4750kg
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 370mm
* Overall Length when closed: 1.36 metres
* Unit Weight: 180kg
* Zinc Finish

 
Type: TJS5 Tilt Jib (Short)
Type: TJS5 Tilt Jib (Short)

Drawing and Specifications:     TJS5_Sales

Type: STJS5 Tilt Jib (Short)


Type: STJS5 Tilt Jib (Short)

The type STJS5 Tilt Jib (Short) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 1.36 metres can be gained while the Jib can be fully extended to 2.1 metres.
This Jib has been fitted with wide poackets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4750kg
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 1.42 metres
* Unit Weight: 210kg
* Zinc Finish

 
Type: STJS5 Tilt Jib (Short)
Type: STJS5 Tilt Jib (Short)

Drawing and Specifications:     STJS5_Sales

Type: TJL5 Tilt Jib (Long)


Type: TJL5 Tilt Jib (Long)

The type TJL5 Tilt Jib (Long) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 2.4 metres can be gained while the Jib can be fully extended to 3.59 metres. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4750kg
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 370mm
* Overall Length when closed: 2.16 metres
* Unit Weight: 240kg
* Zinc Finish

 
Type: TJL5 Tilt Jib (Long)
Type: TJL5 Tilt Jib (Long)

Drawing and Specifications:     TJL5_Sales

Type: STJL5 Tilt Jib (Long)


Type: STJL5 Tilt Jib (Long)

The type STJL5 Tilt Jib (Long) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with jib attachments. A maximum of 2.4 metres can be gained while the Jib can be fully extended to 3.65 metres.
This Jib has been fitted with wide pockets suitable for Forklifts with special hydraulic Tine positioners. Simply slide onto the Fork Tines and secure with safety chain.

Supplied with safety swivel Hook and Shackle.

* Safe Working Load: 4750kg
* Fork Pocket Size: 185 x 75mm
* Fork Pocket Centres: 875mm
* Overall Length when closed: 2.22 metres
* Unit Weight: 270kg
* Zinc Finish

 
Type: STJL5 Tilt Jib (Long)
Type: STJL5 Tilt Jib (Long)

Drawing and Specifications:     STJL5_Sales

Type: SJ2 Slip-On Jib


Type: SJ2 Slip-On Jib

Slip-on Jib, suitable for most Forklifts and fitted in seconds. Two lifting points available.

Supplied with a safety swivel Hook and Shackle.

SPECIFICATIONS:

* 2000kg SWL at 500mm Load Centre
* 2000kg SWL at 1000mm Load Centre
* Unit Weight 65kg
* Pocket Size 185 x 85mm
* Pocket Centres 3000mm

 
Type: SJ2 Slip-On Jib
Type: SJ2 Slip-On Jib

Drawing and Specifications:     SJ2_Sales_revised

Type: SJW2.5 / SJW4.5 / SJW7 / SJW11 Slip-On Jib


Type: SJW2.5 / SJW4.5 / SJW7 / SJW11 Slip-On Jib

A simple slip-on Jib with 2 hook positions. With the fork pockets at a wider setting, this style of jib is also well suited to Forklifts with Fork Positioners where they may not be able to slide the fork tines close together.

Supplied with safety swivel Hook and Shackle.

 
Type: SJW2.5 / SJW4.5 / SJW7 / SJW11 Slip-On Jib
Type: SJW2.5 / SJW4.5 / SJW7 / SJW11 Slip-On Jib

Drawing and Specifications:     SJW2_5_Sales  SJW4_5_Sales  SJW7_Sales  SJW11_Sales

Type: SBJ6 Fork Truck Battery Jib


Type: SBJ6 Fork Truck Battery Jib

Jib for removal and replacement of Fork Truck batteries. Four hook points are provided at 916mm x 510mm centres and two centre hook points are provided to allow this unit to be configured for a four or two point lift. This slip-on Forklift attachment is held to the Forklift by a safety chain and comes complete with 4 safety swivel Hooks suspended on 0.5 metre slings.

SPECIFICATIONS:

* 2000kg Safe Working Load
* Load Centre 654mm
* Unit Weight 64kg
* Pocket size 165 x 65mm
* Pocket Centres 255mm

 
Type: SBJ6 Fork Truck Battery Jib
Type: SBJ6 Fork Truck Battery Jib

Drawing and Specifications:     SBJ6_Sales

Type: GNJ2.5 / GNJ4.5 / GNJ6 Carriage Mount Jib


Type: GNJ2.5 / GNJ4.5 / GNJ6 Carriage Mount Jib

A heavy duty Carriage Mounted Jib offering height and manoeuvrability.

This Jib mounts to standard FEM mountings and comes with an Optional Support Stand upon request. Three (3) hook positions have been incorporated in its design with the Safe Working Loads (SWL) for each position shown in the Table below.

Supplied with safety swivel Hook and Shackle.

 
Type: GNJ2.5 / GNJ4.5 / GNJ6 Carriage Mount Jib
Type: GNJ2.5 / GNJ4.5 / GNJ6 Carriage Mount Jib

Drawing and Specifications:     GNJ2_5_Sales  GNJ4_5_Sales  GNJ6_Sales

Type: CMJ-2Carriage Mounted Jib


Type: CMJ-2Carriage Mounted Jib

The CMJ-2 Carriage Mounted Jib has been designed to lift loads up to 1000 kg maximum, and offers additional height and more working area. This unit has been manufactured to suit Class 2 mounting, and is fitted with Quick Release lower carriage hooks for easy installation.

Two hook positions have been incorporated into it's design. The unit is also supplied with a safety swivel hook for lifting. Standard finish is enamel paint, black in colour.

SPECIFICATIONS:

Safe Working Load: 1000 kg at 555 mm load centre
Unit Weight: 65 kg
Carriage Mounting: Class 2

 
Type: CMJ-2Carriage Mounted Jib
Type: CMJ-2Carriage Mounted Jib

Drawing and Specifications:     CMJ_2_Sales

Type: BBP2000 Bulk Bag Lifter


Type: BBP2000 Bulk Bag Lifter

A two prong bag lifter ideal for container loading. The operator need not leave their seat to disengage the bag.

OPTIONAL STAND is available.

SPECIFICATIONS:

* 2000kg Safe Working Load
* Unit Weight 200kg
* Load Centre 725mm
* Height above Carriage 400mm
* Prong Centres 800mm

 
Type: BBP2000 Bulk Bag Lifter
Type: BBP2000 Bulk Bag Lifter

Drawing and Specifications:     BBP_2000_Sales

Type: BJFL1 Slip-On Bulk Bag Jib


Type: BJFL1 Slip-On Bulk Bag Jib

A slip-On Bulk Bag Jib attachment designed with 4 lifting points to suit standard Bulk Bags. The Jib is fitted with four (4) safety swivel hooks.

SPECIFICATIONS:

* Safe Working Load 2000kg
* Unit Weight 75kg
* Hook Centres 900mm
* Load Centre 700mm
* Pocket Size 165 x 65mm
* Pocket Centres 640mm

 
Type: BJFL1 Slip-On Bulk Bag Jib
Type: BJFL1 Slip-On Bulk Bag Jib

Drawing and Specifications:     BJFL_1_Sales


 

back to top >>